BTS4000 is based on Neware 4th-generation testing system, and was introduced into the market in 2008. It's the upgrade version of the most popular battery test equipment series of BTS3000.
BTS4000 applies all the applications of BTS3000, plus EV battery pulse test, HPPC test and DCIR (direct current internal resistance) test.
Comparing with BTS3000, BTS4000 greatly improved the hardware response time, data acquisition frequency and result accuracy.
BTS4000 is the perfect test system in Neware's line of high quality, dependable test systems.
BTS4000 can be configured with multi-current range channels, which have a current control range of 0A to 3000A. These multi-current range channels can be configured for voltage ranges of 0V to 110V. The accuracy for current and voltage on these channels is ± 0.05% FS.
BTS4000 is now widely used by research institutes, colleges and universities and EV battery manufacturers all around our country.
Features and functions
◆Industry leading accuracy up to ±0.05% FS
◆pulse test, HPPC test and DCIR supported
◆4 channels paralleled available
◆Multi-current range available(4 ranges per channel)
◆Single channel data acquisition frequency up to 100Hz
◆Rising and falling time ≤20ms
◆Auxiliary voltage and temperature channels available
◆Wide range of applications (cycle, grading, over charging/discharging, pulse)
◆Every channel can be user programmed to operate in steps of CCC(Constant Current Charging), CVC(Constant Voltage Charging), CC&CVC(Constant Current & Constant Voltage Charging), CPC(Constant Power Charging), CCD(Constant Current Discharging), CPD(Constant Power Discharging), CRD(Constant Resistance Discharging), Pulse, etc.
◆Adaptable to a wide range of products (cells, batteries, super-capacitors and battery modules, etc.)
◆Completely independent channels allow users to run multiple independent tests simultaneously without affecting other channels
◆With the BTS client software, data is easily viewed graphically
◆Work without computer mode, up to 1GB testing data storage capacity
◆Diverse alligators and probe connection accessories for choose
Specifications
◆Input Power: AC 110V/220V/380V ±10% 50Hz/60Hz
◆Output Range: 0 - 110V
◆Resolution: AD(16bit); DA(16bit)
◆Control Accuracy: ±0.05% of FS
◆Measuring Accuracy: ±0.05% of FS
◆Rise Time: ≤20ms (10%-90% Current)
◆Data recording rate: 10Hz(Single channel up to 100Hz), △T/△U/△I
◆Operating modes: Charge - CC(Constant Current),CV(Constant Voltage), CC&CV(Constant Current & Constant Voltage), CP(Constant Power), Pulse
◆Discharge- CC(Constant Current),CP(Constant Power),CR(Constant Resistance),CC&CV(Constant Current & Constant Voltage),Pulse
◆Min pulse width: 500ms
◆Paralleling mode: up to 4 channels
◆Multi range: Each channel supports 4 ranges
